PEBBLECRETE / MATERIAL LIBRARY

PebbleCrete Supreme

Illustrative sample. Individual blends vary.

A cement-based mixed-aggregate pool finish. Compare the texture and reflected light of a current physical sample.

Composition

Glass beads in every blend, combined with natural aggregate and/or glass crystals.

The decorative finish is not structural repair or waterproofing. Substrate preparation and the complete pool system need separate specification.

PebbleCrete Supreme is a cement-based exposed-aggregate pool finish built on glass beads, combined with natural aggregate and glass crystals, manufactured by PEBBLE CRETE CO., LTD. in Phuket, Thailand, and supplied to pool builders, architects and distribution partners across Southeast Asia, the Indian Ocean, the Middle East and Europe.

Key facts

Applied thickness	10 mm nominal
Coverage	One 25 kg bag covers approximately 1.8 square metres at 10 mm
Binder	White Portland cement bought locally, used with the PebbleCrete modifier we supply.
Pigment	One pre-weighed pigment pack per batch (for pigmented colours)
Aggregate	Glass beads in every blend, combined with natural aggregate and/or glass crystals
Curing	Under water — the pool is filled promptly after application
Mix	Three bags per batch
Application	PebbleCrete supplies material and technical support, not installation
Samples	Physical samples are available on request, subject to availability
Service life (planning figure)	15–20 years — an industry estimate, not a warranty term. Where an individual pool falls within or outside that range depends on substrate preparation, application quality, water chemistry and routine maintenance. The material warranty is set out separately.

Explore the colours Request samples or technical advice

Specification resources

Material selection guide Technical documents

Explore the colour collection

Start with a colour. See where it takes you.

Explore the sample, see the material in a completed pool where photographs are available, then request a physical sample for your project.

Find a colour Colours shown in pools

PebbleCrete Supreme

Amber Halo

PebbleCrete Supreme

Amethyst Blue

PebbleCrete Supreme

Aqua Blue

See in 1 pool

PebbleCrete Supreme

Arctic Blue

See in 2 pools

PebbleCrete Supreme

Azure Blue

See in 1 pool

PebbleCrete Supreme

Black Halo

See in 2 pools

PebbleCrete Supreme

Blue Sea

See in 2 pools

PebbleCrete Supreme

Canyon Gold

PebbleCrete Supreme

Clear Blue

See in 1 pool

PebbleCrete Supreme

Crystal Blue

See in 1 pool

PebbleCrete Supreme

Garnet Velvet

PebbleCrete Supreme

Gold Rush

PebbleCrete Supreme

May Lily

PebbleCrete Supreme

Monsoon Grey

PebbleCrete Supreme

Royal Blue

See in 1 pool

PebbleCrete Supreme

Salt and Pepper

PebbleCrete Supreme

Strawberry Field

PebbleCrete Supreme

Tortoiseshell

PebbleCrete Supreme

Turquoise Lagoon

See in 2 pools

PebbleCrete Supreme

Verde

See in 1 pool

PebbleCrete Supreme

Verde Natural

PebbleCrete Supreme

White Halo

See in 3 pools

The material in completed pools

Curved pool beside sun loungers, parasols and a swim-up bar at Kata Sea Breeze Resort.

PebbleCrete Classic + PebbleCrete Supreme

Kata Sea Breeze Resort, Phuket

Ocean Blue Aquamarine Azure Blue White Halo

7 photographs · Kata, Phuket, Thailand

Explore this setting

Courtyard pool surrounded by terraces, parasols and tiled villa roofs at Sai Taan Villa.

PebbleCrete Supreme + PebbleCrete Glass

Sai Taan Villa, Phuket

Clear Blue

8 photographs · Phuket, Thailand

Explore this setting

Curved pool with submerged loungers and parasols overlooking a beach at The SIS Kata.

PebbleCrete Supreme

The SIS Kata, Phuket

Blue Sea Black Halo

11 photographs · Kata, Phuket, Thailand

Explore this setting

Explore settings using this material

Sample images are illustrations. They give a general idea of colour, texture and particle size and show the finish wet; the sample triangle represents about 12 cm of surface. PebbleCrete is made from natural stone, glass or both and is applied by hand, so colour and the mix of particles vary from batch to batch and from pool to pool. Lighting, screens, water depth and surroundings also change how a finish looks. These images are not a substitute for a physical sample. Always confirm your choice with a current physical PebbleCrete sample and an on-site mock-up (test panel) prepared by your applicator before work starts: an approved dry sample is compared dry, while the on-site mock-up is judged wet. The finished surface should be judged against the approved mock-up and physical sample, not against the images on this site. PebbleCrete supplies the material. Unless PebbleCrete has agreed otherwise in writing, the application, the mock-up and the finished result are the responsibility of the owner and their applicator.

Photography © respective photographers and rights holders. Images from project archives and public sources illustrate PebbleCrete materials in use. Construction and installation are carried out by independent contractors; inclusion here does not attribute the work to PEBBLE CRETE CO., LTD. or to a particular contractor.