PEBBLECRETE / MATERIAL LIBRARY

PebbleCrete Glass

Illustrative sample. Individual blends vary.

A glass-bead aggregate pool finish with a distinctive response to light.

Composition

Glass beads form the entire aggregate component of this cement-based finish.

The decorative finish is not structural repair or waterproofing. Substrate preparation and the complete pool system need separate specification.

PebbleCrete Glass is a cement-based pool finish whose aggregate is glass beads throughout, manufactured by PEBBLE CRETE CO., LTD. in Phuket, Thailand, and supplied to pool builders, architects and distribution partners across Southeast Asia, the Indian Ocean, the Middle East and Europe.

Key facts

Applied thickness	10 mm nominal
Coverage	One 25 kg bag covers approximately 1.8 square metres at 10 mm
Binder	White Portland cement bought locally, used with the PebbleCrete modifier we supply.
Pigment	One pre-weighed pigment pack per batch (for pigmented colours)
Aggregate	Glass beads throughout
Curing	Under water — the pool is filled promptly after application
Mix	Three bags per batch
Application	PebbleCrete supplies material and technical support, not installation
Samples	Physical samples are available on request, subject to availability
Service life (planning figure)	15–20 years — an industry estimate, not a warranty term. Where an individual pool falls within or outside that range depends on substrate preparation, application quality, water chemistry and routine maintenance. The material warranty is set out separately.

Explore the colours Request samples or technical advice

Specification resources

Material selection guide Technical documents

Explore the colour collection

Start with a colour. See where it takes you.

Explore the sample, see the material in a completed pool where photographs are available, then request a physical sample for your project.

Find a colour Colours shown in pools

PebbleCrete Glass

Andaman Blue

See in 1 pool

PebbleCrete Glass

Andaman Blue Natural

PebbleCrete Glass

Atoll Pearl

See in 1 pool

PebbleCrete Glass

Aurora Pearl

See in 1 pool

PebbleCrete Glass

Carbon Black

PebbleCrete Glass

Domino Pearl

PebbleCrete Glass

Dune

PebbleCrete Glass

Dune Natural

PebbleCrete Glass

Glacial Stream

PebbleCrete Glass

Indigo Pearl

PebbleCrete Glass

Jade Meadow

PebbleCrete Glass

Jade Meadow Natural

PebbleCrete Glass

Nightfall Pearl

See in 3 pools

PebbleCrete Glass

Raindrop

See in 3 pools

PebbleCrete Glass

Raven Pearl

PebbleCrete Glass

Riviera Pearl

See in 1 pool

PebbleCrete Glass

Sea Mist

PebbleCrete Glass

Sea Mist Green

See in 3 pools

PebbleCrete Glass

Sky Blue

PebbleCrete Glass

Slate Pearl

PebbleCrete Glass

Teal Pearl

PebbleCrete Glass

Twilight Shadow

The material in completed pools

Courtyard pool surrounded by terraces, parasols and tiled villa roofs at Sai Taan Villa.

PebbleCrete Supreme + PebbleCrete Glass

Sai Taan Villa, Phuket

Clear Blue

8 photographs · Phuket, Thailand

Explore this setting

Pools, winding river and waterslide towers viewed from above at Garden City Water Park.

PebbleCrete Classic + PebbleCrete Glass

Garden City Water Park, Phnom Penh

Cool Blue

7 photographs · Phnom Penh, Cambodia

Explore this setting

Freeform lagoon pool with curved submerged steps and a tropical garden in Eastern Thailand.

PebbleCrete Classic + PebbleCrete Glass

Tropical Lagoon Pool, Eastern Thailand

4 photographs · Eastern Thailand

Explore this setting

Explore settings using this material

Sample images are illustrations. They give a general idea of colour, texture and particle size and show the finish wet; the sample triangle represents about 12 cm of surface. PebbleCrete Glass is made from glass beads and is applied by hand, so colour and the mix of particles vary from batch to batch and from pool to pool. Lighting, screens, water depth and surroundings also change how a finish looks. These images are not a substitute for a physical sample. Always confirm your choice with a current physical PebbleCrete sample and an on-site mock-up (test panel) prepared by your applicator before work starts: an approved dry sample is compared dry, while the on-site mock-up is judged wet. The finished surface should be judged against the approved mock-up and physical sample, not against the images on this site. PebbleCrete supplies the material. Unless PebbleCrete has agreed otherwise in writing, the application, the mock-up and the finished result are the responsibility of the owner and their applicator.

Photography © respective photographers and rights holders. Images from project archives and public sources illustrate PebbleCrete materials in use. Construction and installation are carried out by independent contractors; inclusion here does not attribute the work to PEBBLE CRETE CO., LTD. or to a particular contractor.