PEBBLECRETE / MATERIAL LIBRARY
Technical documents
Current revisions of the PebbleCrete technical documents for architects, pool designers, contractors and applicators. A new revision replaces all earlier ones, so please check this page before work begins.
Download
- Technical Data Sheet (TDS). PebbleCrete Classic, Supreme and Glass: product data, mixing and site conditions. Rev 2026-10, PDF, 7 pages. Download PDF
- Specification, Section 13 11 00. Specification text for project documents. Rev 2026-10, PDF, 17 pages, also available as an editable Word file. Download PDF · Download Word (.docx)
- How to specify. A short guide for architects and pool designers. Rev 2026-10, PDF, 2 pages. Download PDF
- Installation Overview. The main installation stages, for planning and coordination on site. Rev 2026-10, PDF, 4 pages. Download PDF
Key data
From the Technical Data Sheet, Rev 2026-10. The PDF is the governing document.
| Product lines | PebbleCrete Classic: exposed-aggregate finish. PebbleCrete Supreme: glass beads in every blend, with natural aggregate or glass crystals. PebbleCrete Glass: glass beads only. |
|---|---|
| What it is | A decorative, cement-based exposed-aggregate finish for swimming pools, formed on site and applied by trowel as one continuous layer, with no tile grout lines within the finish. |
| Aggregate fraction | 1–3 mm |
| Supplied as | 25 kg bags; 40 bags per pallet where palletised |
| Applied thickness | 10 mm nominal on the pool shell (walls, floor and steps) |
| Coverage | Approximately 1.8 m² per 25 kg bag at 10 mm, for estimating |
| One batch | 3 × 25 kg aggregate and 40 kg white Portland cement (TIS 133-2562, bought locally), with our cement modifier and, for pigmented colours, one pre-weighed pigment pack. Yield approximately 5.4 m² at 10 mm. |
| Pot life | About 1 hour |
| Other surfaces | Benches, coping and surfaces outside the waterline need a separate project specification. |
Documents for your project
The following documents are issued for a named project. Each copy is marked with the company and project names, and is for that project only.
- Safety Data Sheets (SDS): pool finish aggregate, liquid modifier and dry cement modifier
- Method Statement
- Substrate Acceptance Protocol
- Product Submittal Package
- Material Warranty
- Recommended Installer Warranty Template
- Manufacturer’s Declaration of Origin
Tell us your company name, the project name and country, and the product line. We will send the current revisions by email.